Etna et Sicile
Modérateur : Bureau
- Azzurro
- ROTW
- Messages : 4425
- Enregistré le : samedi 1 juin 2002 - 21:52
- Localisation : Mougins - France (LFMN-LFMD)
- Contact :
Etna et Sicile
Le message est pour Daniele: peux tu compléter les explications données par Fonchy, et nous indiquer comment installer ses élévations pour la Sicile (parues aujourd'hui sur Avsim-n°58576) tout en utilisant ta scène "Etna" (Avsim-n°52870), pour éviter les problèmes.
Fonchy conseille dans ce cas d'installer uniquement ses pods, pas ses datas, mais c'est peut-être dommage, puisque la zone qu'il couvre est beaucoup plus large que la zone "Etna"...
Merci par avance
Fonchy conseille dans ce cas d'installer uniquement ses pods, pas ses datas, mais c'est peut-être dommage, puisque la zone qu'il couvre est beaucoup plus large que la zone "Etna"...
Merci par avance
Vieux pécé windows 10 - tablette Samsung pas jeune - Mac iBook antique - Fibre optique (quand même)
---------------
Non licet omnibus volare cum aquilis
Azzurro
---------------
Non licet omnibus volare cum aquilis
Azzurro
-
- Messages : 578
- Enregistré le : mardi 27 juil. 2004 - 08:48
- Localisation : la mothe achard
-
- Messages : 188
- Enregistré le : dimanche 22 août 2004 - 14:21
- Localisation : LIDB
- Contact :
Ciao Azzurro,
Fonchy installa le elevazioni nella cartella Shared. In questo modo non dovrebbero esserci problemi di conflitto tra i due scenari ( diversamente se copiamo i files nella cartella DATA). Sinceramente però non ho ancora scaricato lo ZIP e una risposta certa non posso darti.
Vedo che ad Alain non crea nessun problema.
Appena provo lo scenario ti scrivo.
Saluti e auguroni
Dan
Fonchy installa le elevazioni nella cartella Shared. In questo modo non dovrebbero esserci problemi di conflitto tra i due scenari ( diversamente se copiamo i files nella cartella DATA). Sinceramente però non ho ancora scaricato lo ZIP e una risposta certa non posso darti.
Vedo che ad Alain non crea nessun problema.
Appena provo lo scenario ti scrivo.
Saluti e auguroni
Dan
- Azzurro
- ROTW
- Messages : 4425
- Enregistré le : samedi 1 juin 2002 - 21:52
- Localisation : Mougins - France (LFMN-LFMD)
- Contact :
Merci Daniele, nous attendrons que tu aies fait les tests.
Question à Alain, as-tu installé les data également, ou seulement le contenu de "shared", c'est à dire uniquement les *.pod
Bon Noël à tous
Question à Alain, as-tu installé les data également, ou seulement le contenu de "shared", c'est à dire uniquement les *.pod
Bon Noël à tous
Vieux pécé windows 10 - tablette Samsung pas jeune - Mac iBook antique - Fibre optique (quand même)
---------------
Non licet omnibus volare cum aquilis
Azzurro
---------------
Non licet omnibus volare cum aquilis
Azzurro
-
- Messages : 578
- Enregistré le : mardi 27 juil. 2004 - 08:48
- Localisation : la mothe achard
-
- Messages : 188
- Enregistré le : dimanche 22 août 2004 - 14:21
- Localisation : LIDB
- Contact :
Ciao Azzurro,
ho provato prima avec i files POD in Shared e poi avec Data. Lo scenario Etna viene "annullato" in tutti e due i casi.
Cosa fare?
Io direi di estrarre i files dello scenario Etna e inserirli nella cartella Data assieme ai files di Fonchy. Fare un file unico POD e metterlo in Shared o in una cartella in Scenery avec un file SCF.
Dan
ho provato prima avec i files POD in Shared e poi avec Data. Lo scenario Etna viene "annullato" in tutti e due i casi.
Cosa fare?
Io direi di estrarre i files dello scenario Etna e inserirli nella cartella Data assieme ai files di Fonchy. Fare un file unico POD e metterlo in Shared o in una cartella in Scenery avec un file SCF.
Dan
-
- Messages : 578
- Enregistré le : mardi 27 juil. 2004 - 08:48
- Localisation : la mothe achard
-
- Messages : 188
- Enregistré le : dimanche 22 août 2004 - 14:21
- Localisation : LIDB
- Contact :
Excuse me Alain.
I have tried first with the files POD in Shared and then with Date. The scenery Etna comes "annulled" in both the cases.
What to do?
I would say to extract the files from the scenery Etna and to insert them in the directory Data together with the files of Fonchy. To make an unique file POD and to copy in Shared or in Scenery with a file SCF.
Dan
I have tried first with the files POD in Shared and then with Date. The scenery Etna comes "annulled" in both the cases.
What to do?
I would say to extract the files from the scenery Etna and to insert them in the directory Data together with the files of Fonchy. To make an unique file POD and to copy in Shared or in Scenery with a file SCF.
Dan
-
- Messages : 578
- Enregistré le : mardi 27 juil. 2004 - 08:48
- Localisation : la mothe achard
- Azzurro
- ROTW
- Messages : 4425
- Enregistré le : samedi 1 juin 2002 - 21:52
- Localisation : Mougins - France (LFMN-LFMD)
- Contact :
Ciao Daniele,Daniele Tona a écrit :To make an unique file POD and to copy in Shared or in Scenery with a file SCF.
Je crois que ta solution "pod unique + scf" à mlacer dans "scenery" est la bonne, car mettre des fichiers dans "shared" n'est pas une bonne solution: selon nos spécialistes, cela oblige Fly! à charger ces éléments même si on vole à l'autre bout de la terre, et cela ralentit la machine.
Peux-tu donner les coordonnées du fichier *.scf qu'il faudrait créer (ou bien expliquer comment cela se calcule puisque tu maîtrises bien ça), cela nous ferait gagner du temps.
Amitiés
Vieux pécé windows 10 - tablette Samsung pas jeune - Mac iBook antique - Fibre optique (quand même)
---------------
Non licet omnibus volare cum aquilis
Azzurro
---------------
Non licet omnibus volare cum aquilis
Azzurro
-
- Messages : 188
- Enregistré le : dimanche 22 août 2004 - 14:21
- Localisation : LIDB
- Contact :
Oui Azzurro,
la solution "pod unique + scf" est meilleur.
Le SCF est:
<bgno> ==== BEGIN SCENERY FILE ====
<name> ---- scenery set name ----
Etna + Sicilia SRTM
<call> ---- coverage area lower left ----
36 00 00.0 N
12 00 00.0 E
<caur> ---- coverage area upper right ----
38 00 00.0 N
17 00 00.0 E
<ldll> ---- load lower left ----
35 00 00.0 N
11 00 00.0 E
<ldur> ---- load upper right ----
39 00 00.0 N
18 00 00.0 E
<file> ---- pod file ----
xxxx.pod
<endo> ==== END SCENERY FILE ====
XXXX: le nom du POD créé
Daniele
la solution "pod unique + scf" est meilleur.
Le SCF est:
<bgno> ==== BEGIN SCENERY FILE ====
<name> ---- scenery set name ----
Etna + Sicilia SRTM
<call> ---- coverage area lower left ----
36 00 00.0 N
12 00 00.0 E
<caur> ---- coverage area upper right ----
38 00 00.0 N
17 00 00.0 E
<ldll> ---- load lower left ----
35 00 00.0 N
11 00 00.0 E
<ldur> ---- load upper right ----
39 00 00.0 N
18 00 00.0 E
<file> ---- pod file ----
xxxx.pod
<endo> ==== END SCENERY FILE ====
XXXX: le nom du POD créé
Daniele
-
- Messages : 578
- Enregistré le : mardi 27 juil. 2004 - 08:48
- Localisation : la mothe achard
-
- Messages : 188
- Enregistré le : dimanche 22 août 2004 - 14:21
- Localisation : LIDB
- Contact :
Hi Alain,
to realize the POD is very simple.
1 - to extract the files from the POD Etna in the directory DATA of FLY! II
2 - to extract in a directory TEMP the files "data" of Fonchy
3 - to copy the files "data" of Fonchy in the directory DATA of FLY! II
4 - with the program PodCreator (ROTW) to recreate a file POD
5 - in SCENERY you set the file POD and SCF (you do an it copy/paste of that some forum)
"LES JEUX SONT FAITS" :D
For now I cannot create the POD unfortunately. I have a very slow phone line and usually me "support" to my friend Luciano Zecca for the upload to AVSIM
to realize the POD is very simple.
1 - to extract the files from the POD Etna in the directory DATA of FLY! II
2 - to extract in a directory TEMP the files "data" of Fonchy
3 - to copy the files "data" of Fonchy in the directory DATA of FLY! II
4 - with the program PodCreator (ROTW) to recreate a file POD
5 - in SCENERY you set the file POD and SCF (you do an it copy/paste of that some forum)
"LES JEUX SONT FAITS" :D
For now I cannot create the POD unfortunately. I have a very slow phone line and usually me "support" to my friend Luciano Zecca for the upload to AVSIM
- roland_lfor
- ROTW
- Messages : 864
- Enregistré le : jeudi 4 juil. 2002 - 13:23
- Localisation : proximité Chartres
-
- Messages : 578
- Enregistré le : mardi 27 juil. 2004 - 08:48
- Localisation : la mothe achard